Online Transformerle...
Online Transformerless Rack Mount 10kVA UPS
Maxpower RM Series is a small to medium power transformer-less UPS of CellNor. This is an Online double conversion UPS with PFC technology and Full digital control (DSP). It has an Output power factor of 0.9.The CN7010MP-RM model support economic (ECO) operation mode
Overview Specifications Ordering Information
Overview
Maxpower RM Series is a small to medium power transformer-less UPS of CellNor. This is an Online double conversion UPS with PFC technology and Full digital control (DSP). It has an Output power factor of 0.9.The CN7010MP-RM model support economic (ECO) operation modeSpecifications
GENERAL FEATURES
- High power density
- Rack/Tower convertible design
- N+X parallel redundancy support maximum 4 unit in parallel
- Online double conversion with full digital control
- Wide input voltage range:110~286Vac
- Wide input frequency range
- Generator compatible
- ECO mode operation for energy saving
- Self-testing when UPS start-up
- Maximum charging current up to 10A
- Cold start
- Intelligent fan speed regulation
| Model | CN7010MP-RM | ||
|
Capacity |
VA |
10000 |
|
|
Watts |
9000 |
||
|
Input |
Normal Voltage |
220/230/240Vac(L+N+PE) | |
|
Operating Voltage Range |
110~286Vac |
||
|
Operating Frequency Range |
40~70Hz (50/60Hz Auto-Sensing) |
||
|
Power Factor |
≥0.99 |
||
| Bypass voltage range |
Max. voltage: 220V: +25%(optional +10%,+15%,+20% ) 230V: +20% (optional +10%, +15%) 240V: +15% (optional +10%) Min. voltage: -45% (optional -20%, -30%) |
||
| Bypass Freq Range | Frequency protection range:±10% | ||
| ECO range | Same as the bypass | ||
| Harmonic distortion (THDi) | ≤5%(100% linear load) | ||
| Generator Input | Support | ||
|
Output |
Output Voltage |
220/230/240Vac | |
|
Power Factor |
0.9 |
||
|
Voltage Regulation |
±1% |
||
|
Frequency Line mode |
±1%/±2%/±4%/±5%/±10% of the rated frequency(optional |
||
|
Frequency Bat mode |
50/60(±0.1)Hz |
||
|
Crest factor |
3:1 |
||
|
Harmonic Distortion (THDv) |
≤2% with linear load, ≤5% with non-linear load |
||
|
Efficiency |
>94% |
||
|
Battery |
Internal |
Battery Voltage |
192/216/240Vdc (Adjustable) |
|
Backup time |
Long run unit depends on the capacity of external batteries Estimated remaining time displayed on the LCD |
||
|
Typical Recharging Time |
6~8 hours (to 90% of full capacity |
||
|
Charging current |
Maximum current 10A; charging current can be set according to battery capacity installed |
||
|
System Features |
Transfer time |
Mains to battery:0ms; Mains to bypass:0ms | |
|
Overload Line Mode |
Load≤110%:60min; ≤125%:last 10min; ≤150%:last 1min;>150% turn to bypass mode |
||
|
Overload Bypass Mode |
63A(Input breaker) |
||
|
Short circuit |
Hold whole system |
||
| Overheat | Line mode: Turn to bypass; Backup mode: shut down UPS immediately | ||
| Battery Low | Alarm and switch off | ||
| Self-diagnostics | Upon power on and software control | ||
| Battery | Advanced battery management | ||
| Audible & Visual alarms | Line failure, Battery under voltage, Overload, System fault | ||
| LED & LCD display | Line mode, Bat. mode, Eco mode, Bypass mode, Battery under voltage, Overload & UPS Fault | ||
| LCD Display | Input voltage, Input frequency, Output voltage, Output frequency, Load percentage, Battery voltage, Inner temperature & Remaining battery backup time | ||
| Communication interface | RS232,USB,SNMP card(optional), Relay card (optional) | ||
|
Environment |
Operating temperature |
0~40°C | |
| Storage temperature | -25~55°C | ||
|
Humidity Range |
0~95% (Non-condensing |
||
| Altitude | <1500m | ||
| Noise Level | 58dB at 1 Meter | ||
|
Physical |
Dimension |
440x625x86.5 | |
|
Weight |
18 |
||
|
Standards |
Safety |
IEC/EN62040-1,IEC/EN62477-1 | |
|
EMC |
IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,IEC61000-4-5,IEC61000-4-6,IEC61000-4-8 |
||
| EXTERNAL BATTERY PACK | |
| Model | CNBC10120CR |
|
Battery Type |
VRLA (Lead acid maintenance free battery) |
| Typical battery recharging time | 6~8 hours (to 90% of full capacity) |
| Typical Battery Life | 3~5 years, depend on discharging cycle and ambient temperature |
|
System Voltage |
±120Vdc |
| Battery Qty | 1*±10 pcs |
|
Capacity |
7Ah/9Ah (12V) |
| Backup time @ 50% load | 7 minutes |
| Backup time @ 100% load | 2 minutes |
| Dimension | 440 x 680 x 131 |
| Net weight(kg) | 58/63 |
| Environment safety | CE |
| Operating environment | 0°C~40°C |
| Relative humidity | 0~95% (Non condensing) |
| Noise Level | <40dB at 1 Meter |
Ordering Information
| Part Number | Description | ||
|
CN7010MP-RM |
10kVA Medium Power Transformerless UPS Rack Mount |
||
|
CNBC10120CR |
120 Vdc Battery Pack |
||
